Like Us - Facebook | Follow Us - Twitter | Join Us - LinkedIn
Product
Newsletter
Leave a message
Welcome your valuable comments to write!
Contact us
Tel:0755-88608146 83221096
Fax:0755-82775557
Technical support:0755-23987441
E-MAIL:sunnie@sunbestrfid.com.cn
OFFICE Address:Rm409,B1,Fortune Plaza, Futian Bonded Zone, Shenzhen
Contact:Sunnie zheng, Wendy xue
Home » products
Standalone reader-9916ST
  • FIGURE
  • SPECIFICATION
  • DOWNLOAD
                 
 9916ST User Menu
 
  • Brief Introduction
  This product is a kind of single door controller. It set the selectable time duration(by dip switch) that door closes automatically. Relay can be selected with open status and close status. In addition, it has a terminal connected with bottom.
 
  • General Feature
  1. Operate Card capacity:  1000
 
  1. The controller can add and delete one or all Operate Cards by Manage Card (Add Card and Delete Card).Manage Card can be changed too.
 
  1. It set the selectable time duration(by dip switch) 1, 5, 10, 30 seconds that door closes automatically.
 
  1. Buzzer and Two color LED :  Red and Green flash means starting, adding card and deleting card, and changing Manage card,  Red means ok, Green means door opening status. Buzzer call once means opening door, adding card, deleting card and changing Manage card being successful.
 
  1. Power supply:  An external 12V DC source
 
  • Function Set
Controller must restart.
  1. The selectable time duration Set:
When you open the door by Operate Card then door closes automatically by the selectabe time duration(by dip switch) 1, 5,10,30 seconds.
Dip Switch labeled 2,1 can set the function. Toward ON means 00, Toward 2,1 means 11.
  00 means 1s   01 means 5s   10 means 10s   11 means  30s
  1. Add and Delete Set:
  Dip Switch labeled 3 can set the function. Toward ON means changing Manage Card, Toward 3 means adding and deleting Operate Card .(Note: When read Operate Card then open door, Dip Switch( 3 ) towards 3.) 
 
(1). When you change Manage Card ,Dip switch ( 3 ) towards ON, the first card read is set Add Card, the second card read is set Delete Card.
(2). When you add Operate Card , Dip switch ( 3 ) towards 3 , Add Card should be read once at the first, then the Operate Cards that you want to add should be read, when your all Operate Cards are finished, finally, you Add Card should be read once again, means adding Operate Card being finished.
(3). When you delete Operate Card , Dip switch ( 3 ) towards 3 , Delete Card should be read once at the first, then the Operate Cards that you want to delete should be read, when your all Operate Cards are finished, finally, you Delete Card should be read once again, means deleting Operate Card being over. When Delete Card is near by the controller for four seconds ,and hear one call of buzzer, mean those all Operate Cards saved being deleted.
 
  • System Configuration

 
   
 
 Number    Name                Description
  1  GND           Signal Ground
  2  +12V           +12V Power supply 
  3    REL_CL     Open relay terminal connected with Lock
  4  REL_OP     Close relay terminal connected with Lock
  5    SB The terminal connected with button of Open door
 
 

Contact
TOP